1 2 3 4

High Resistance Jig, 4 Wire Low Resistance Standards, Low Resistance Standards, Manufacturer, Exporter, Supplier, Pune, India

High Resistance Jig
High Resistance Jig
   
Technical Specification :
High Resistance Jig
Make :
ZEAL
Model : ZMHRJ-1GΩ-100GΩ
Description : Ranges :
1GΩ, 2GΩ, 5GΩ, 7GΩ, 10GΩ, 50GΩ, 100GΩ
Max DC Test Voltage :
1000V/2000V
Accuracy :
2%
     
 
High Resistance Jig
     
Technical Specification :
High Resistance Jig  
Make :
ZEAL
Model :
ZMHRJ-5M-1000GΩ
Description : Ranges :
5MΩ, 10MΩ, 100MΩ, 200MΩ, 500MΩ, 1GΩ, 10GΩ, 100GΩ, 1000GΩ
Max DC Test Voltage: 5000V
Accuracy :
@ 5000 V DC
1% for 5MΩ, 10MΩ, 100MΩ, 200MΩ
2% for 500MΩ, 1GΩ, 10GΩ,
5% for 100GΩ, 1000GΩ
     
It is very useful tool to calibrate Insulation testers, Million Meg Ohm meters and Resistivity meters.
     
 
4 Wire Low Resistance Standards
     
Technical Specification :
4 Wire Low Resistance Standards  
Make :
ZEAL
Model :
ZMLRJ
Set of 4 wire Low Resistance standards Fixed resistors :
10µΩ, 50µΩ, 100µΩ, 1mΩ, 10mΩ, 100mΩ, 1000mΩ
Maximum Test currents :
For 10µΩ, 50µΩ : 20 A
For 100µΩ ,1mΩ : 10 A
For 100mΩ,10mΩ : 1A
For 1000mΩ : 100 mA
Accuracy class :
0.25% for 10µΩ, 50µΩ,0.1% for 100µΩ, 1mΩ, 10mΩ, 100mΩ, 1000mΩ
• Four wire low resistance standard is a source of fixed resistances of different values from micro-ohm to milliohm.
• Four wire measurements are best for low resistance measurements. Current is pumped (through A+ and A- binding posts) and voltage drop is measured (across V+ and V- binding posts). Using formula R=V/I, resistance is calculated.
Accessory : set of banana to banana cables of suitable length (2 red and 2 black)